• Golf Clubs
• Bags
• Balls
• Clothing
• Gloves
• Shoes
• Accessories
• Trolleys

Attaching the new grip to the shaft.

Fill the grip about three-quarters full of solvent. Put your finger over the hole in the end of the grip, squeeze the grip opening closed and shake the grip so the solvent covers the entire inside. Use common sense when working with solvents; use in a well ventilated area, away from naked flames. Dispose of any excess by pouring back into a sealed container, not down the sink.
	Place a container under the grip to catch any over-spill of solvent. Pour the solvent along the tape and be ready to install the grip.
Push the grip up and over the shaft butt. Hold the grip by the front and back and push using equal pressure with both hands. Once you start the grip sliding over the tape, do not stop until the grip is completely on the shaft.
Line up the grip so that the manufacturers name sits on top of the grip and is square to the leading edge of the golf club.
	Clean any excess solvent from the grip and let it sit for at least an hour in a well ventilated room. Then you're ready to go play.
Direct Golf UK stock branded grips by TaylorMade, Callaway, Nike Golf, Ping and Cobra - all available as single grips or in kit form containing nine grips, tape and instructions. Additionally, we have a wide selection of generic grips from Golf Pride, Winn Grip and Avon in the accessories area of our website.